SOMMER CABLE DMX kabel XLR 3pin 5m bk Hicon

DMX cable by premium manufacturer Sommer Cable
These premade cables are the perfect choice for the transmission of the 110 ohms AES/EBU DMX512 data format.
Important note: the use of a standard microphone cable is not recommended due to data and information losses (caused by the skin effect). In the lighting domain data losses cause a total jam with signal transmissions or the control of scanner systems.
The very affordable price of this cable should make it easy to switch from a standard microphone cable to a proper AES/EBU cable. Our AES/EBU cable guarantees the error-free data transfer even over longer distances of up to 100 metres. We use the BINARY 234 AES/EBU MKII AES/EBU cable with 100 % shielding and the HICON XLR connectors.

High-quality data cable

AES/EBU- and DMX-conformant, highly flexible
Very good shielding through the use of copper spiral shielding and a fleece vaporized with aluminum
Extremely robust with an especially strong jacket
Only a little more expensive than a standard microphone cable
For networking of scanners, lighting units, digital mixing boards, etc.
For indoor and outdoor installation
For connection of digital audio amplifiers, DAT-recorders, etc.
Made in Germany
Construction:
(2LI2YS 0.34 mm²) (ST)CY

Jacket:
PVC 7.0 mm


FRNC: 5.6 mm

No. of inner conductors:
2 x 0.34 mm² (AWG 22)

Copper strand per conductor:
19 x 0.15 mm

Conductor insulation:
Foam/skin-PE 1.50 mm

Shielding:
copper spiral shielding + aluminum steamed fleece

Shielding factor:
100 %

Temperature range:
-25° C to +70° C

Fire load per m:
0.17 kWh (520-0051 F:0.23 kWh)

Weight per 1 m:
50 g

Packaging:
5 m roll

Electrical data


Capac. cond./cond. per 1 m:
<65 pF

Capac. cond./shield. per 1 m:
>115 pF

Cond. resistance per 1 km:
53 ohms

Insulation resist. per 1 km >1 Gohms


Surge impedance:
110 ohms

Plug 1:
HICON HI-XCF3N-BLK XLR female, black

Plug 2:
HICON HI-XCM3N-BLK XLR male, black